Highcross products

The universal dimmer module EPM-DM3D is designed to control lighting loads. The module can operate in three-channel, twochannel and one-channel modes. The device supports dimming of both forward (leading edge) and reverse phase (trailing edge) type loads. The control, data exchange and configuration are all handled via TCP/IP protocol.

Every channel has a pair of digital inputs for manual control and supports one-button and two-button control modes.
The device supports 110 and 220 VAC power, high power incandescent and halogen lamps, electronic and magnetic lowvoltage, neon/cold cathode, dimmable fluorescent, dimmable LED lighting loads.

The universal dimmer module EPM-DM6D is designed to control LED lighting loads as well as incandescent and halogen loads. The module operates in six-channel mode and can be configured to five-channel and four-channel modes. The device supports dimming type of both leading edge and trailing edge modes and non-dim mode. The control, data exchange and configuration are all handled via TCP/IP protocol.

Every channel has a pair of digital inputs for manual control and supports one-button and two-button dimming control modes.
The device supports 110 and 220 VAC power, dimmable LED lamps, incandescent and halogen lamps, dimmable power supplies and other lighting loads.

The Highcross EPM-RL6D is a module designed to switch lighting, motors and other high voltage loads via relays. The module features digital inputs allowing to control outputs via standard buttons or switches without an external control system. The device supports 220-250 VAC applications.

All channels are normally open and are disconnected when the power is off. The control, data exchange and configuration are all handled via TCP/IP protocol. The module is designed to be installed on a standard 35 mm DIN rail.

ECM-LD4D module is designed to control brightness of LED strips. The module is compact and uses 1kHz PWM to constant voltage lighting control and has two versions to control up to 10A/30VDC or 5A/48VDC load for every channel. The outputs can be combined to increase the output power up to 20A, 30A and 40A @ 30VDC.

The control, data exchange and  onfiguration are all handled via TCP/IP protocol. Every channel has a pair of digital inputs for manual control and supports one-button and two-button control modes.

ECM-LD9D module is designed to control brightness of up to 9 monocolor LED strips or 3 RGB LED strips or their combinatios. The costeffective module uses 1kHz PWM to constant voltage lighting control and has two versions to control up to 10A/30VDC or 5A/48VDC load for every channel. Some or all outputs can be combined to increase the output power up from 20A up to 75A @ 30VDC.

The control, data exchange and configuration are all handled via TCP/IP protocol. Every channel has a pair of digital inputs for manual control and supports one-button and two-button dimming control modes.

EPM-BS3D is a motor control module designed to provide control of bidirectional motors for drapes, shades and skylights as well as projection screens, lifts and gates via mutually exclusive high voltage relays.

The module features digital inputs allowing motor control via standard buttons without an external control system. The device switches channels off automatically after individual channel's timeout.