Highcross products

The Highcross ECM-IO16D module has sixteen digital input/output channels. Digital inputs can be configured as normally-open or normally-close input type.
Digital outputs are implemented as open collector.

Control of device is produced by TCP/IP network. Built-in web-interface is used to device configuration. The module is designed to be installed on a standard 35 mm DIN rail.

The Highcross ECM-RL12LVD module has twelve low-voltage low-current signal relay outputs for providing a potential-free output contact. All channels are  normally open and are disconnected when the power is off.

The control, data exchange and configuration are all handled via TCP / IP protocol. The module is designed to be installed on a standard 35 mm DIN rail.

The analog output module ECM-AO4D is designed to control equipment via analog 0-10V interface.

The module has open collector terminals to control the external power relays or as an additional source of ON and OFF signal.

The control, data exchange and configuration are all handled via TCP / IP protocol.

Every channel has a pair of digital inputs for manual control and supports one-button and two-button control modes.